I purchased all 15 windows & doors with matching sidelites and I was told that my windows were a retrofit pocket installation and they were to reuse my existing trim and everything would be fully insulated guaranteed. Much to my surprise after a few years I noticed air leakage around some windows and around the doors in which THEY said everything was insulated & must be from a previous install. After I investigated these errors I found windows that were not properly sealed from the exterior weather air leakage/moisture, seal failures & frozen interior windows and doors. I also thought I had ventilation problems with the attic etc and added larger vents to see if ventilation was inadequate and was more than required. I removed my interior extension jambs to see if the windows were measured too small which creates air infiltration around the windows along with extreme heat loss and I was correct TOO SMALL in which I was told they were measured correctly, according to my measurements almost 1/2" too small all way around.

Were do I begin with seal failures and sash replacement, almost every window has been replaced and water infiltration underneath the exterior of the gaskets of the windows causing mold growth and they say it is almost impossible, WELL IT"S POSSIBLE. Let's see almost 15, 000 in cost and I will have to replace all the windows and doors the CORRECT way